Bed Light Bundle for Ford Ranger 2024-2026

FEATURES
-5W 2.2" Multi-Functional Accessory Light
-IP 68 Rated Waterproof Die-Cast Aluminum Housing
-600 RAW lumens of light output for vibrant visibility
-Clear Lens
-Replaceable Colored Lens Options
-Flood Light Pattern
-Easy Attachment via Dzus clip or Hardware
-Each Light Sold Individually

**NOTE: Please keep in mind that the wiring harness is not included in the Single version of this light, but it is included in the Pair Pack / System version.

LIGHT PERFORMANCE
-Raw Lumens: 600 lm

SPECIFICATIONS
-Wattage: 5W per light
-LED Source: 15 x Samsung SMD 3035 LED
-Amp Draw: 0.40A
-Voltage: 9V-16V
-IP Rating: IP68
-Product Dimensions: W - 2.20" x D - 0.53"

COMPACT, VERSATILE & EASY TO INSTALL
The 5W Cyclone V2 LED light uses a multi-functional compact design delivering 600 lumens of LED output and is incredibly bright. Originally designed for Off-Road Racers as an interior dome light, the Cyclone LED light has evolved into an all-purpose light for rock crawling, engine bays, wheel wells, truck beds, grills, bumpers, and an infinite amount of lighting applications. This is due to its compact 2.2" diameter, flat .53" height, and bright flood pattern.

LOW DRAW
Offering an efficient high-output to draw, it's not uncommon to see over a dozen Cyclones installed on a rig. Everywhere from the under the hood, wheel wells, the underbelly, to the interior of your cabin - it's never been easier, to put light where it's needed.

UNIVERSAL MOUNTING OPTIONS
Cyclone V2 LED lights feature a die-cast aluminum housing with a centrally located universal mounting hole. These Cyclone kits come with the necessary hardware to attach your Cyclone LED light(s) under the hood of your vehicle with minimal installation time, effort, or fuss.

WHEREVER YOU WANT THEM
KC has focused on mounting solutions for popular applications such as surface, angled, and flush mounts. While still utilizing the signature center mounting hole, the Cyclone V2 now features a provision to integrate a magnetic mounting solution for more ways to customize your nighttime adventure experience.

RACE TO ADVENTURE DURABILITY
Cyclone V2 LEDs use a die-cast aluminum base that provides strength, rigidity while providing great heat dissipation. The impact-resistant polycarbonate hard-coated lens will survive the toughest of terrains. Rated at IP68, the Cyclone V2 LED is sealed and water-resistant giving you the flexibility to traverse into the most demanding trails.

FEATURES
-5W 2.2" Multi-Functional Accessory Light
-IP 68 Rated Waterproof Die-Cast Aluminum Housing
-600 RAW lumens of light output for vibrant visibility
-Diffused Lens
-Replaceable Colored Lens Options
-Flood Light Pattern
-Easy Attachment via Dzus clip or Hardware
-Each Light Sold Individually

**NOTE: Please keep in mind that the wiring harness is not included in the Single version of this light, but it is included in the Pair Pack / System version.

LIGHT PERFORMANCE
-Raw Lumens: 600 lm

SPECIFICATIONS
-Wattage: 5W per light
-LED Source: 15 x Samsung SMD 3035 LED
-Amp Draw: 0.40A
-Voltage: 9V-16V
-IP Rating: IP68
-Product Dimensions: W - 2.20" x D - 0.53"

COMPACT, VERSATILE & EASY TO INSTALL
The 5W Cyclone V2 LED light uses a multi-functional compact design delivering 600 lumens of LED output and is incredibly bright. Originally designed for Off-Road Racers as an interior dome light, the Cyclone LED light has evolved into an all-purpose light for rock crawling, engine bays, wheel wells, truck beds, grills, bumpers, and an infinite amount of lighting applications. This is due to its compact 2.2" diameter, flat .53" height, and bright flood pattern.

LOW DRAW
Offering an efficient high-output to draw, it's not uncommon to see over a dozen Cyclones installed on a rig. Everywhere from the under the hood, wheel wells, the underbelly, to the interior of your cabin - it's never been easier, to put light where it's needed.

UNIVERSAL MOUNTING OPTIONS
Cyclone V2 LED lights feature a die-cast aluminum housing with a centrally located universal mounting hole. These Cyclone kits come with the necessary hardware to attach your Cyclone LED light(s) under the hood of your vehicle with minimal installation time, effort, or fuss.

WHEREVER YOU WANT THEM
KC has focused on mounting solutions for popular applications such as surface, angled, and flush mounts. While still utilizing the signature center mounting hole, the Cyclone V2 now features a provision to integrate a magnetic mounting solution for more ways to customize your nighttime adventure experience.

RACE TO ADVENTURE DURABILITY
Cyclone V2 LEDs use a die-cast aluminum base that provides strength, rigidity while providing great heat dissipation. The impact-resistant polycarbonate hard-coated lens will survive the toughest of terrains. Rated at IP68, the Cyclone V2 LED is sealed and water-resistant giving you the flexibility to traverse into the most demanding trails.

FEATURES
-5W 2.2" Multi-Functional Accessory Light
-IP 68 Rated Waterproof Die-Cast Aluminum Housing
-600 RAW lumens of light output for vibrant visibility
-Amber Lens
-Replaceable Colored Lens Options
-Flood Light Pattern
-Easy Attachment via Dzus clip or Hardware
-Each Light Sold Individually

**NOTE: Please keep in mind that the wiring harness is not included in the Single version of this light, but it is included in the Pair Pack / System version.

LIGHT PERFORMANCE
-Raw Lumens: 600 lm

SPECIFICATIONS
-Wattage: 5W per light
-LED Source: 15 x Samsung SMD 3035 LED
-Amp Draw: 0.40A
-Voltage: 9V-16V
-IP Rating: IP68
-Product Dimensions: W - 2.20" x D - 0.53"

COMPACT, VERSATILE & EASY TO INSTALL
The 5W Cyclone V2 LED light uses a multi-functional compact design delivering 600 lumens of LED output and is incredibly bright. Originally designed for Off-Road Racers as an interior dome light, the Cyclone LED light has evolved into an all-purpose light for rock crawling, engine bays, wheel wells, truck beds, grills, bumpers, and an infinite amount of lighting applications. This is due to its compact 2.2" diameter, flat .53" height, and bright flood pattern.

LOW DRAW
Offering an efficient high-output to draw, it's not uncommon to see over a dozen Cyclones installed on a rig. Everywhere from the under the hood, wheel wells, the underbelly, to the interior of your cabin - it's never been easier, to put light where it's needed.

UNIVERSAL MOUNTING OPTIONS
Cyclone V2 LED lights feature a die-cast aluminum housing with a centrally located universal mounting hole. These Cyclone kits come with the necessary hardware to attach your Cyclone LED light(s) under the hood of your vehicle with minimal installation time, effort, or fuss.

WHEREVER YOU WANT THEM
KC has focused on mounting solutions for popular applications such as surface, angled, and flush mounts. While still utilizing the signature center mounting hole, the Cyclone V2 now features a provision to integrate a magnetic mounting solution for more ways to customize your nighttime adventure experience.

RACE TO ADVENTURE DURABILITY
Cyclone V2 LEDs use a die-cast aluminum base that provides strength, rigidity while providing great heat dissipation. The impact-resistant polycarbonate hard-coated lens will survive the toughest of terrains. Rated at IP68, the Cyclone V2 LED is sealed and water-resistant giving you the flexibility to traverse into the most demanding trails.