-55W Halogen Bulb
-Slim Black Polymax Housing
-Direct Replacement KC Fog Light 05-06 Jeep Wrangler TJ
-Computer Designed Polished Reflector Optics
-Durable Optical Quality Glass Lens
-Fog Beam Pattern
-Raw Lumens: 1,450 lm per light
-Lux @ 10 Meters: Fog- 250 lx
-Candela (per light): 25,00 cd
-Beam Distance (Meters): Fog- 316m
-Wattage: 55W per light
-Amp Draw: 4.58A
-IP Rating: IP67
-Product Dimensions: W - 6" x H - 6.75" x D - 3"
Parts Included in Jeep TJ Pair Pack system
-Jeep OE Plug-N-Play Connector
-Integrated 6" Stone Guard
ADVANCED REFLECTOR OPTICS
6" Apollo Pro Halogen Jeep TJ replacement Fog Light delivers 250 lx @ 10m of light output with a beam distance of 316 meters. The Apollo Pro's optical glass lens, computer designed polished optical reflectors and powerful 55W Halogen bulbs combine to produce super bright light output. Not only is there more range and power, but also improved clarity.
AVAILABLE BEAM PATTERN AND ADVANTAGES
Fog Beam- Provides a low, extremely wide angle light pattern that increases visibility below your headlights into the distance. Fog beam adds additional light to directly in front of your vehicle with side illumination for road edges. Fog beam performs well in Fog, Snow, Rain, or low visibility conditions.
DESIGNED FOR STRENGTH AND DURABILITY
The Apollo Pros were created for the most demanding off road terrains. Featuring an IP67 rated Polymax housing and built in stone guards, these lights are engineered to deliver high performance and reliability for 2005-2006 Jeep Wrangler TJs.
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
- OEM light
Just put this light on today. It replaces an OEM light that went AWOL. Looks and works Great!!!
So far everyone been telling me that the lights look awesome. They are bright and the price was right compared to the originals.
So I have a 2006 Jeep Wrangler Unlimited, also known as an LJ. These fit nicely, they plug right into the factory fog light plug. Yes the bolts are 2mm larger, so you will either want to replace what comes with these lights, or drill out the factory holes. I drilled mine out and sprayed some paint to prevent rust. Really love the look of these lights over the factory setup.
I bought my 2005 Jeep TJ used and it came without the factory fog lights installed. The wiring plugs were there as well as the headlight switch (pull end of headlight switch left). The fog lights themselves were missing. These directly bolt into the factory location. I did have to slightly enlarge the mounting hole in the bumper by drilling it, that was a bit unexpected but it was mentioned in the instructions. Other than that, you bolt them in, plug into the wire harness and aim and tighten the adjustment bolts. Install took about 20 minutes plug maybe 15 more to aim them. They are same wattage as stock, so no new wiring or relays needed if your Jeep is already factory equipped for fog lights. Overall I am very pleased with them. They do a great job.
These fog lights fit my 2006 Jeep Wrangler Rubicon perfectly. Wiring harness were well built and just the right length. A very nice replacement!