Multiple Vehicle Application Kit 6-Cyclone LED System
-5-Color Variations: Clear, Amber, Red, Blue, or Green
-Easy Plug-N-Play Installation
-Includes various brackets for different fitment needs
-Raw Lumens: 516 lm
-Wattage: 5W per light
-LED Source: Samsung 5630 LEDs
-Amp Draw: 0.42A
-IP Rating: IP68
-Dimensions: D - 0.53" x W - 2.20"
-Complete Cyclone LED rock light kit with Cyclone Lights, Premium fuse block with ground post and switch, 6 Deluxe Wiring Harnesses (2 x 16ft, 2 x 11ft, 2 x 8ft), Universal mounts with installation hardware
PERFORMANCE OUTPUT AND CLARITY
Cyclone LEDs are a multi-functional and compact auxiliary LED lighting solution. Originally designed for Off Road Racers as an interior dome light, the Cyclone LED light has evolved into an all purpose light for rock crawling. With it’s compact 2.2" diameter, flat 0.53" height and bright flood pattern they are perfect for undercarriage lighting for off roading at night.
FLOOD BEAM PATTERN
The Cyclone LED comes in a flood beam pattern to provide a large pattern of light by utilizing an infinite vertical and horizontal beam pattern. This delivers ample illumination over short distances.
DESIGNED FOR DURABILITY
Off-road race tested, the Cyclone LED was designed to handle the harshest environments. Featuring an IP68 rated housing, the Cyclone LED kit is resistant to moisture and dust.
Available Part Numbers
• Cyclone LED Rock Light Kit, 6 PC Clear – #91035
• Cyclone LED Rock Light Kit, 6 PC Amber – #91036
• Cyclone LED Rock Light Kit, 6 PC Red – #91037
• Cyclone LED Rock Light Kit, 6 PC Blue – #91039
• Cyclone LED Rock Light Kit, 6 PC Green – #91038
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
- rock lights
- replacement piece
- ground nut
We love the rock lights. Easy to install. We installed in each wheel well and under steps. Need two more for the rear. Now we just need to get out and try them out on the trail. Love KC!
The LED lights, wiring and hardware is of top quality. No flimsy feeling foreign wiring connectors. Out of the package the lights are nicely made. They attach to mounting brackets which you need to attach to the underbody. That’s easy if there are no running boards. The front lights I had to attach with a L bracket. The rear lights were easier to install. I attached the rear wiring to the frame with zip ties. The kit provides self tapping screws and wire ties to attach to the under carriage. I just used my own wire ties to secure the wiring to the frame. I ran the wiring in loom up under the wheel well plastic and behind the front fenders. The driver side wires ran along the firewall in loom to the passenger side. The supplied junction box I attached to the plastic barrier next to the battery. There is excess wiring that I had to shorten and then attached to the junction block. The ground nut is attached in the area near where the wires come up from the wheel well. For the switch, I have an A post replacement piece with spots for 4 switches. I ran the wiring through the plus sign looking circle that is below the master cylinder on the firewall. There are some you tube vids that show some installation tips. I’ll attach a few pics for your reference. It took me a few hours to install. Most of my time was spent on the wiring.