FREE Cyclone Light with $150 Purchase!

  • United States
  • Australia

Shopping cart is empty

6" Apollo Pro Halogen Pair Pack System

Starting From

In stock

$152.60

Select Options

$152.60

* Required Fields

Overview

KC HiLiTES 6" Apollo Pro Halogen feature 100w Halogen bulbs in a spread, spot or fog beam pattern. Uses a tough round slim black polymax housing, glass lens, and built in stone guards for harsh terrains. System includes relay wiring harness.

Details

FEATURES
-100W Halogen Bulbs
-Slim Black Polymax Housing
-Computer Designed Polished Reflector Optics
-Durable Optical Quality Glass Lens
-Spread, Spot, or Fog Beam Pattern

LIGHT PERFORMANCE(PER LIGHT)
-Raw Lumens: 2,452 lm
-Lux @ 10 Meters: Spot- 1,962 lx , Spread- 1,200 lx , Fog- 400 lx
-Candela: Spot- 196,200 cd, Spread- 120,000 cd, Fog- 40,000 cd
-Beam Distance (Meters): Spot- 886m, Spread- 693m, Fog- 400m

SPECIFICATIONS
-Wattage: 100W
-Amp Draw: 8.3A
-Voltage: 9V-32V
-IP Rating: IP67
-Product Dimensions: W - 6" x H - 6.75" x D - 3"

Parts Included in Pair Pack system
-(2) 100W 6" Apollo Pro Halogen lights
-Deluxe Wiring Harness with 2-Pin weatherproof connectors
-30 Amp Illuminated Switch w/ Switch Panel
-(2) Built in Stone Guard/Bezels

ADVANCED REFLECTOR OPTICS
6" Apollo Pro Halogen lights deliver 1,962 lx @ 10m of light output with a beam distance of 886 meters. The Apollo Pro's optical glass lens, computer designed polished optical reflectors and powerful 100W Halogen bulbs combine to produce super bright light output. Not only is there more range and power, but also improved clarity.

AVAILABLE BEAM PATTERN AND ADVANTAGES
Different beam patterns offer specific lighting benefits to meet your lighting needs.

Spot Beam- Provides focused bright light for maximum forward distance and high speed visibility.

Spread Beam- Provides a balanced wider beam of light that increases peripheral visibility, as well improved forward facing light for an increased range of visibility.

Fog Beam- Provides a low, extremely wide angle light pattern that increases visibility below your headlights into the distance. Fog beam adds additional light to directly in front of your vehicle with side illumination for road edges. Fog beam performs well in Fog, Snow, Rain, or low visibility conditions.

DESIGNED FOR STRENGTH AND DURABILITY
The Apollo Pros were created for the most demanding off road terrains. Featuring an IP67 rated Polymax housing and built in stone guards, these lights are engineered to last and perform for years to come.

Available Part Numbers
• 6" Apollo Pro Pair Pack System - Black - KC #150 (Spot Beam)
• 6" Apollo Pro Pair Pack System - Black - KC #151 (Spread Beam)
• 6" Apollo Pro Pair Pack System - Black - KC #152 (Fog Beam)

Details

FEATURES
-100W Halogen Bulbs
-Slim Black Polymax Housing
-Computer Designed Polished Reflector Optics
-Durable Optical Quality Glass Lens
-Spread, Spot, or Fog Beam Pattern

LIGHT PERFORMANCE(PER LIGHT)
-Raw Lumens: 2,452 lm
-Lux @ 10 Meters: Spot- 1,962 lx , Spread- 1,200 lx , Fog- 400 lx
-Candela: Spot- 196,200 cd, Spread- 120,000 cd, Fog- 40,000 cd
-Beam Distance (Meters): Spot- 886m, Spread- 693m, Fog- 400m

SPECIFICATIONS
-Wattage: 100W
-Amp Draw: 8.3A
-Voltage: 9V-32V
-IP Rating: IP67
-Product Dimensions: W - 6" x H - 6.75" x D - 3"

Parts Included in Pair Pack system
-(2) 100W 6" Apollo Pro Halogen lights
-Deluxe Wiring Harness with 2-Pin weatherproof connectors
-30 Amp Illuminated Switch w/ Switch Panel
-(2) Built in Stone Guard/Bezels

ADVANCED REFLECTOR OPTICS
6" Apollo Pro Halogen lights deliver 1,962 lx @ 10m of light output with a beam distance of 886 meters. The Apollo Pro's optical glass lens, computer designed polished optical reflectors and powerful 100W Halogen bulbs combine to produce super bright light output. Not only is there more range and power, but also improved clarity.

AVAILABLE BEAM PATTERN AND ADVANTAGES
Different beam patterns offer specific lighting benefits to meet your lighting needs.

Spot Beam- Provides focused bright light for maximum forward distance and high speed visibility.

Spread Beam- Provides a balanced wider beam of light that increases peripheral visibility, as well improved forward facing light for an increased range of visibility.

Fog Beam- Provides a low, extremely wide angle light pattern that increases visibility below your headlights into the distance. Fog beam adds additional light to directly in front of your vehicle with side illumination for road edges. Fog beam performs well in Fog, Snow, Rain, or low visibility conditions.

DESIGNED FOR STRENGTH AND DURABILITY
The Apollo Pros were created for the most demanding off road terrains. Featuring an IP67 rated Polymax housing and built in stone guards, these lights are engineered to last and perform for years to come.

Available Part Numbers
• 6" Apollo Pro Pair Pack System - Black - KC #150 (Spot Beam)
• 6" Apollo Pro Pair Pack System - Black - KC #151 (Spread Beam)
• 6" Apollo Pro Pair Pack System - Black - KC #152 (Fog Beam)

Reviews

  • Four Stars
    Rating
    "Works as well as I expected."
    john perrin (Verified Buyer)
  • "Fairly easy installation and they're bright lights. I wouldn't run them on the highway with traffic unless you wanna be bright lighted or possibly get a ticket. They're as bright as my stock high beams on my 04 f150"
    Cody
  • "I installed these lights on my truck."

    Pro
    Good looking Driving lights that give off the right kind of light and appear to be sturdy enough to take on any of the elements

    Con
    A pain to install, but comes with clear and precise instructions
    Potuswhs (Verified Buyer)
  • "I got these for my husband for Christmas for his Jeep and he loves them. He put them on immediately and said they were easy to install. We can now go looking for deer in a lot of places we couldn't see before. Love these!"
    Jennifer Schoffstall
  • Love these.
    Rating
    "Love my driving lights. Very bright light, illuminates a good portion of the area in front of me - I put them on the front bumper of my Jeep and use them instead of high beams. I've clocked the distance that they illuminate signs on a straight stretch of road, and they are good for well over 3/10th of a mile - at least a tenth of a mile further than my high beams. Relatively easy to install, they are a bit time consuming but mentally it's very easy work to do. I'm not great with electrical work and was able to figure it out and install mistake-free the first time.
    My only complaint is that you cannot take the rock guard off, but it doesn't interfere with the actual output of lights - it's mainly that I don't like looking like a rolling billboard for KC - and the grids mean you can't use the brush at the gas station to wash road salt or dirt off the lens. You have to spray them with a spray bottle or hose."
    Beebo
  • "I installed these on the windshield frame of my 2014 Jeep Wrangler JK using the KC light brackets. The only issue I have with these is the short pigtail coming off the lights. I ended up cutting the connector off and splicing longer wires so that I could have the connectors underneath the hood of the Jeep.

    If you mount the wiring harness near the battery there is enough of the protective sheathing to cut back and use the excess to cover the wires that go from the lights themselves to under the hood. There is a You-Tube video that shows an access hole filled with rigid foam that you can route the wires for the switch through. I used a coat hanger to do this.
    I did originally get the Daystar rocker switch that is recommended with these lights but I didn't like the way it looked in the Jeep and there is really no good place to mount just one switch without buying the whole panel grouping they sell. I ended up using the switch supplied in this kit and mounted it on the lower dash panel to the left of the steering wheel.

    This was easy to access while the side panel is removed for routing the wires. I used a 1/2" spade bit to make the hole but don't let it get away from you while drilling, there is a speaker behind it. Anyway, I mounted the switch and it looks really nice and minimalistic but easy to feel around for and use. After setting up the lights they are really nice! I can turn them on during the day and still see them ref...
    Steve
  • "I bought these for my husbands truck. When i first saw them i was so excited! They looked awesome and i couldnt wait to install them.

    He had a bar on the front that we placed them on, on the inside of the headlights right in front of the grill. After some adjusting they were perfect! Extremely bright, perfect for our dirt road travel."
    amber grubbs
  • "I haven't installed them just yet, but they shipped same day or order and got here 2 days faster then expected. Great product, great price what more could you want"
    Andrew C. (Verified Buyer)
  • Love my KC's
    Rating
    "Easy install and light the trail really good with a driving/spot combo"
    larry chad pruett (Verified Buyer)
  • Five Stars
    Rating
    "Work as they should."
    james laird (Verified Buyer)
  • "First off, these lights look great on my JK 2011. They don't block my view as much as previous lights and installed easily through the separate windshield hinge light mounts I bought for 35 dollars. Installing the lights on the windshield took less than 15 minutes for both lights. The part that took the longest was the wiring. This was my first ever wiring job on any car I have owned so I had no experience wiring from the engine to inside the cab. I tried a google search and multiple youtube videos with no help on how to run the wiring through. I went out to figure a route myself. The first route I found was a yellow foam on the driver side under the windshield wiper hood area. The cab side of it could be accessed by removing the left panel near the steering wheel by just plying it off. I was under the assumption that the small hole filled with yellow foam inside the cab would lead to the larger foam under the wiper hood. I was wrong and lost some tool bits inside there trying to make a hole which I still can't get out. Don't use that method. I ended up finding a simpler route by taking off the driver side foot shaped piece that the passenger side KC light will bolt on too. I was able to run the two white and green wires from the relay in the engine easily to under that bracket and into the cab. From there, it was homestretch to where I wanted to install the switch. After routing the two wires that way, I still had around 5 feet of slack to play with. The brown groun...
    JP
  • Amazing
    Rating
    "Bought these. Installed them on my bumper on my 2002 TJ jeep. One night at around 4:30am, I hit a deer. It took one of the lights with it. Snapped it off a the pivoting point on the light. Got a replacement outer shell for the light, plug it back in.. Turn the lights on, and it still worked.. Mind you. This light hit a 130lb deer, while i was going 45mph. Hit the road, skidded about 20feet on the road. The only thing that saved the glass was the stone guard. yes the back of the metal housing is bent do to it hitting my metal bumper.. But it still work, which is amazing. As for the lights performance.. Couldnt ask for better, they both throw very good patterns and have nice coloring to them."
    1shot

Submit A Review

  • Rating

    Rating